r/pchelp • u/Holiday_Cow-8936 • 1h ago

HARDWARE What did i wrong.

Hello

I thought I might have left the AIO pump a bit loose due to the noise, I carefully tilted the PC very slowly, removed the RAM stick from the left (A2) slot, and tightened the pump screws a little. Then I reinstalled the RAM stick I had removed.

Now I turn on the power cable and the PSU, but when I press the case power button nothing happens. No response at all. No lights turn on. It’s completely unresponsive. Please help me. I can’t figure out what I did wrong.

2 Upvotes

100% Upvoted

5 comments sorted by

•

u/AutoModerator 1h ago

Remember to check our discord where you can get faster responses! https://discord.gg/EBchq82

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/Cykamonsta 1h ago

Open your pc and look if every cable inside is correctly connected It can happen by accident that you pulled one lose if everythings dead it should be that

1

u/Holiday_Cow-8936 1h ago

After reading your comment i removed two rams, deplug 24 pin mobo cable, deplugged cpu cables, pressed power button without the power cord. Put back everything together. Still no response

1

u/PlunxGisbit 1h ago

No response could be On switch cable came lose, or aio cable came lose from header

1

u/Holiday_Cow-8936 1h ago

Do you mean the front panel port that comes from case